Consumables \u00b7 Materials Guide

Aviation Sealants Guide: Classes, Work Life, Cure Time and Shelf Life

An aviation sealant is easy to overlook until a leak is found and the right one is not on the shelf. This guide explains how sealants are specified and why availability matters.

Published 13 November 2026·5 min read·Structures technicians, storekeepers & procurement

What sealants do

Aircraft sealants close joints and fasteners against fuel, air, water and corrosion. They are used in fuel tanks, in pressurised areas and between mating surfaces. Many are two-part products based on chemistries such as polysulfide or polythioether.

Reading the specification

A sealant is usually identified by a specification and a class and application-life code. Always use the product called out in the maintenance manual, not a lookalike.

Class: broadly describes how the sealant is applied. For example, brush-on, fillet or faying-surface use.

Work life: how long the mixed product can be applied. A code such as B-2 indicates a longer working time than B-1/2.

Cure time: how long before the joint can be handled or returned to service.

Shelf life and storage

Sealants have a limited shelf life and storage conditions matter, with many products stored cold. An out-of-date or poorly stored sealant is not acceptable even if it looks usable.

Ask for the batch date, shelf-life information and certificate of conformity when buying.

When it becomes an AOG

A leak repair can be stopped by a missing sealant, the right class or a product past its shelf life. Keeping the commonly used products in stock helps, as does sourcing early. See rotable vs expendable aircraft parts and private jet AOG prevention, or send a request to the AOG desk.

Submit an AOG request or pre-enrol your aircraft in five minutes.